One inspector,
two layers.
A real 3D model for the outside — orbit it, zoom it, recolour it to your paint. Factory cutaways for the inside — engine, oil, plugs, transaxle. Same pins, same data.
Everything the workshop manual won’t.
3D + cutaway inspector
Orbit a 3D model and recolour it to your paint, or drop into factory cutaways. Every system pinned and clickable.
Real part numbers & torque
Mahle OX 366D. Drain plug 50 Nm. Wheel bolts 130 Nm. Mobil 1 0W-40, 7.5 L. The numbers that matter, on the part.
DIY service log
Record every job with a checklist, mileage and cost — DIY or shop. Reset reminders and track what is due next.
Fault finding
Pick a symptom and get likely causes, diagnostic checks and the parts to order — from coolant pipes to AOS to PDK.
Claude over MCP
Connect your garage to Claude and let it log services, look up specs and diagnose faults from any chat.
RAG knowledge base
Workshop manual, owner handbook and technical bulletins indexed and searchable, grounded to your exact build.
Your garage,
wired to Claude.
Expose your garage as an MCP server. Ask Claude in any chat to log a service from a photo of a receipt, pull a torque spec, or walk a fault with your live OBD codes — reading and writing here with your approval.
Every job, on the record.
Log each service with a checklist, mileage and cost — DIY or shop. Your full history travels with the car and feeds Claude’s answers.